Advantages of this machine:

• machine ready for use (no installation time)
  
• low required floor space
  
• simple handling
  
• non-stick transport belt
  
• belt cleaning without cleaning materials
  
• paint recovery
  
• swivel transport for outfeed and infeed of the machine
  
• minimum quantity colour supply unit (Paint-Shuttle) or spray system as desired by
  customer
  
• quick colour change (water based lacquer, solvent based lacquer and stain lacquer)
  
• high performance linear unit with servo motor for gun drive
  
• dry extraction and filtered supply air system
  
• infinitely variable speed controller for transport speed
  
• integrated control cabinet with SPS
  
• touch-panel for the handling of the complete spraying machine
  
• low procurement and operating costs
  

This is used for processing solvent-free UV paint.
The over spray is recovered with a concurrent reduction of the amount of exhausted air in the shortest way. This takes place using rotating, conical extraction drums open on both sides.

At the same time, the spray guns are aligned on the infeed of the front opening drum. By means of a steel belt conveyor, the workpieces are transported through the rotary centre of the extraction drum.
Oversprayed paint is transferred via the steel belt to scraper for recovery. The paint vapour settles on the inner wall of the drum and is conveyed by a removal device to the recycling site. A regenerable dry filter cleans the exhaust air from paint particles.

This machine concept is only available using a continuous steel belt, because with this combination maximum recovery is possible.

Advantages of this machine:

• a higher level of recovery of the overspray and rapid return
  
• reduction of the costs for disposal
  
• low exhaust air volume
  
• lowest burden on the environment